STATUS INSTRUMENTS / RAIL MOUNT TEMPERATURE TRANSMITTERS

SEM1605THV

DIN RAIL WITH THERMISTOR I/P AND VOLTAGE O/P

ACCEPTS MULTIPLE THERMISTOR TYPES AND Pt1000, Pt500 SENSORS
(0 to 10) VOLTAGE THREE WIRE OUTPUT
USER OUTPUT TRIM (ZERO and SPAN)
PC CONFIGURATION USING USB PORT
LIVE DATA CAN BE VIEWED ON AN ANDROID PHONE OR TABLET

ขอใบเสนอราคา↗ โทรหาเรา 081-454-5784

ราคาและระยะเวลานำเข้าขึ้นกับรุ่นและจำนวน ทีมงานตอบกลับภายใน 1 วันทำการ

เอกสารดาวน์โหลด

DatasheetPDF · 226 KB↓คู่มือการใช้งานPDF · 416 KB↓EC DeclarationPDF · 158 KB↓

01 / OVERVIEW

ภาพรวม

The SEM1605THV is a DIN rail mounted Voltage Output temperature transmitter from Status Instruments. It has been designed to accept most common thermistor temperature sensor inputs together with Pt1000 and Pt500 RTD inputs and provide the user with a standard three wire (0 to 10) volt output signal. The output signal is linear to temperature.

Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1605THV and your PC. Our free configuration software will guide you through any changes you wish to make. To further help save time, the SEM1605THV does not need to be wired to a power supply during the configuration process.

02 / FEATURES

คุณสมบัติเด่น

Active Range

The SEM1605THV is provided with a user push-button ranging option, allowing adjustments at both 0 V and 10 V against a live input. The ‘user adjust’ function can be locked during configuration if not required. The state LED indicates out-of-range input during normal operation; during ‘user adjust’ it is also used to indicate the stage of adjustment.

(0 and 10) V Trim

The buttons can also be used for 0 V and 10 V trim adjustment to add small offsets to (0 or 10) V output.

Sensor Referencing

The SEM1605THV sensor referencing, via the Windows based USB-Speedlink software, allows for close matching to a known reference sensor, eliminating possible sensor errors.

Thermistor Sensor Library

The Thermistor type required is loaded onto the SEM1605THV from a software library using the USB-Speedlink software. The sensor library can be added to as new sensors become available or are requested. Thermistor sensors with a resistance value up to 100 K Ohms can normally be accommodated.

USB PC Configuration

The SEM1605THV is quick and easy to configure using a standard-type USB lead and the free-of-charge USB-SpeedLink Windows software.

USB VIEW The SEM1605THV: can be connected to an android phone or tablet using an OTG USB adaptor. Running a free App, the Android device can then be used to view live data from the SEM1605THV.