Sensor Referencing
The SEM310 sensor referencing via the Windows based USBSpeedlink software allows for close matching to a known reference sensor eliminating possible sensor errors.

HART UNIVERSAL TEMPERATURE TRANSMITTER
ราคาและระยะเวลานำเข้าขึ้นกับรุ่นและจำนวน ทีมงานตอบกลับภายใน 1 วันทำการ
The SEM310 is a HART 5 upwards, (generic device) compatible universal transmitter. It accepts RTD, Thermocouple, Potentiometer or millivolt input signals and converts them to the industry standard (4 to 20) mA transmission signal. Alternatively, HART multidrop mode can be selected.
The SEM310 is programmed using a standard USB lead. The ATEX / UKEX / IECEx version (SEM310X) is programmed with a ATEX / UKEX / IECEx approved communication lead (USBX Config).
Both versions use our free configuration USBSpeedlink software downloaded from our web site. Standard features can also be programmed using HART communication.
*1 Dual channel input not available on slide wire or multi wire RTD.
The SEM310 sensor referencing via the Windows based USBSpeedlink software allows for close matching to a known reference sensor eliminating possible sensor errors.
In addition to sensor referencing, current output trimming is possible via the USB and HART commands.
The SEM310 can be programmed with a custom linearization to suit nonstandard sensors or sensors with unusual or unique characteristics. Consult the sales office for details.
If a sensor wire is broken or becomes disconnected the SEM310 output will automatically go to its user defined level (upscale or downscale) or pre-set value.
For ease of system calibration and commissioning the output can be set to a pre-defined level anywhere within the (4 to 20) mA range. Hart® Registered trademark of the HART Communication Foundation.
ส่งรุ่นสินค้า สภาพหน้างาน หรือสเปกที่ต้องการ ทีม TXP จะช่วยตรวจสอบรุ่น ราคา และระยะเวลานำเข้าให้
ส่งอีเมลถึงเรา↗99/107 หมู่บ้านศุภาลัย พาร์ควิลล์ ราชพฤกษ์-345 ต.ลำโพ อ.บางบัวทอง จ.นนทบุรี 11110
เปิดใน Google Maps ↗