STATUS INSTRUMENTS / TEMPERATURE TRANSMITTERS

SEM210 & SEM210X

UNIVERSAL TEMPERATURE TRANSMITTER

UNIVERSAL INPUT, DUAL CHANNEL*1
ATEX, UKEX & IEC Ex VERSION
MATHS FUNCTIONS
SENSOR CHARACTERISTICS DOWNLOAD VIA USB PORT ALLOWS FOR CUSTOM TYPES
SIL HARDWARE SAFETY INTEGRITY

ขอใบเสนอราคา↗ โทรหาเรา 081-454-5784

ราคาและระยะเวลานำเข้าขึ้นกับรุ่นและจำนวน ทีมงานตอบกลับภายใน 1 วันทำการ

เอกสารดาวน์โหลด

DatasheetPDF · 370 KB↓คู่มือการใช้งานPDF · 907 KB↓EC DeclarationPDF · 316 KB↓

01 / OVERVIEW

ภาพรวม

The SEM210 is a universal transmitter that accepts RTD, Thermocouple, Potentiometer or millivolt input signals and converts them to the industry standard (4 to 20) mA transmission signal.

The SEM210 is programmed using a standard USB lead. The ATEX / UKEX / IECEx version (SEM210X) is programmed with a ATEX / UKEX / IECEx approved communication lead (USBX Config).

Both versions use our free configuration software USBSpeedlink downloaded from our web site.

*1 Dual channel input not available on slide wire or multi wire RTD.

02 / FEATURES

คุณสมบัติเด่น

Sensor Referencing

The SEM210 sensor referencing via the Windows based USBSpeedlink software allows for close matching to a known reference sensor eliminating possible sensor errors.

Custom Linearisation

As standard the SEM210 has all common RTD and thermocouple sensors available from its software library. Additionally, the SEM210 can be programmed with up to 22-point custom linearization/ correction where required. For nonstandard sensors or sensors with unusual or unique characteristics, consult the sales office for details.

Sensor Burn Out Detection

If a sensor wire is broken or becomes disconnected the SEM210 output will automatically go to its user defined level (upscale or downscale) or a pre-set value.

Output Current Preset

For ease of system calibration and commissioning the output can be set to a pre-defined level anywhere within the (4 to 20) mA range.

Diagnostics

Diagnostic features such as maximum and minimum values stored on the SEM210 are available to view when using the USB configuration software. A 150-point rate adjustable log is stored on the SEM210 for reviewing of process data.