STATUS INSTRUMENTS / TEMPERATURE TRANSMITTERS

SEM206THV

IN-HEAD, THERMISTOR INPUT (0 to 10) V OUTPUT

ACCEPTS MULTIPLE THERMISTOR TYPES AND Pt1000, Pt500 SENSORS
(0 to 10) V THREE WIRE VOLTAGE OUTPUT
PC PROGRAMMABLE
FAST RESPONSE TIME
CUSTOM THERMISTORS AVAILABLE

ขอใบเสนอราคา↗ โทรหาเรา 081-454-5784

ราคาและระยะเวลานำเข้าขึ้นกับรุ่นและจำนวน ทีมงานตอบกลับภายใน 1 วันทำการ

เอกสารดาวน์โหลด

DatasheetPDF · 331 KB↓คู่มือการใช้งานPDF · 332 KB↓EC DeclarationPDF · 159 KB↓

01 / OVERVIEW

ภาพรวม

The SEM206THV is an in-head transmitter that accepts thermistor temperature sensors as well as Pt1000 and Pt500 RTDs and converts the sensor output over a configured range to a standard industrial (0 to 10) Volt output signal. The output signal is linear to temperature.

PC configuration allows the user to select Range and Burnout direction, without requiring calibration equipment. Configuration is performed quickly using our USB port-driven configurator by simply connecting two clips to the SEM206THV power terminals and following the software instructions. Calibration set up may be saved as a file on the PC for later use.

The output signal is linear to temperature. A variety of thermistor types are available when using USB-SpeedLink configuration software. Please consult your supplier for custom thermistors.

02 / FEATURES

คุณสมบัติเด่น

Sensor Referencing

The SEM206THV sensor referencing, via the Windows based USB-Speedlink software, allows for close matching to a known reference sensor, eliminating possible sensor errors.

Sensor Burn-Out Detection

If a sensor wire is broken or becomes disconnected, the SEM206THV output will automatically go to its userdefined level, upscale or downscale

Stability

The SEM206THV in-head transmitter incorporates the latest digital technology to ensure accurate, low-drift performance.

Thermistor Sensor Library

The Thermistor type required is loaded onto the SEM206THV from a software library using the USB-Speedlink software. The sensor library can be added as new sensors become available or are requested. Thermistor sensors with a resistance value up to 100 K Ohms at 25 °C can normally be accommodated.